SH

Section: Misc. Reference Manual Pages (1L)
Updated: MS-DOS - OS/2 Version 2.3
Index Return to Main Contents
 

NAME

sh, rsh - shell, the standard/restricted command programming language  

SYNOPSIS

sh [ -acefhiknmrstuvx0R ] [ args ]
rsh [ -acefhiknmrstuvx0R ] [ args ]  

DESCRIPTION

sh is a command programming language that executes commands read from a terminal or a file. Rsh is a restricted version of the standard command interpreter sh; it is used to set up login names and execution environments whose capabilities are more controlled than those of the standard shell. See Invocation below for the meaning of arguments to the shell.  

Definitions

A blank is a tab or a space. A name is a sequence of letters, digits, or underscores beginning with a letter or underscore. A parameter is a name, a digit, or any of the characters *, @, #, ?, -, $, and !.  

Commands

A simple-command is a sequence of non-blank words separated by blanks. The first word specifies the name of the command to be executed. Except as specified below, the remaining words are passed as arguments to the invoked command. The command name is passed as argument 0 (see exec(2)). The value of a simple-command is its exit status if it terminates normally, or (octal) 200+status if it terminates abnormally (see signal(2) for a list of status values).

A pipeline is a sequence of one or more commands separated by | (or, for historical compatibility, by ^). The standard output of each command but the last is connected by a pipe(2) to the standard input of the next command. Each command is run as a separate process; the shell waits for the last command to terminate. The exit status of a pipeline is the exit status of the last command.

A list is a sequence of one or more pipelines separated by ;, & (OS/2 only), &&, or ||, and optionally terminated by ; or & (OS/2 only). Of these four symbols, ; and & have equal precedence, which is lower precedence than that of && and ||. The symbols && and || also have equal precedence. A semicolon (;) causes sequential execution of the preceding pipeline; an ampersand (&) causes asynchronous execution of the preceding pipeline (i.e., the shell does not wait for that command to finish. This option is only available under OS/2 and is restricted to single commands and not pipelines because of the differences in the UNIX and OS/2 process models). The symbol && (||) causes the list following it to be executed only if the preceding pipeline returns a zero (non-zero) exit status. An arbitrary number of new-lines may appear in a list, instead of semicolons, to delimit commands.

A command is either a simple-command or one of the following. Unless otherwise stated, the value returned by a command is that of the last simple-command executed in the command.

for name [ in word ... ] do list done
Each time a for command is executed, name is set to the next word taken from the in word list. If in word ... is omitted, then the for command executes the do list once for each positional parameter that is set (see Parameter Substitution below). Execution ends when there are no more words in the list.
select name [ in word ... ] do list done
A select command prints on standard error (file descriptor 2), the set of words, each preceded by a number. If in word ... is omitted, then the positional parameters are used instead (see Parameter Substitution below). The PS3 prompt is printed and a line is read from the standard input. If this line consists of the number of one of the listed words, then the value of the parameter name is set to the word corresponding to this number. If this line is empty the selection list is printed again. Otherwise the value of the parameter name is set to null. The contents of the line read from standard input is saved in the parameter REPLY. The list is executed for each selection until a break or end-of-file is encountered.
case word in [ pattern [ | pattern ] ... ) list ;; ] ... esac
A case command executes the list associated with the first pattern that matches word. The form of the patterns is the same as that used for file-name generation (see File Name Generation) except that a slash, a leading dot, or a dot immediately following a slash need not be matched explicitly, and the match is case sensitive.
if list then list [ elif list then list ] ... [ else list ] fi
The list following if is executed and, if it returns a zero exit status, the list following the first then is executed. Otherwise, the list following elif is executed and, if its value is zero, the list following the next then is executed. Failing that, the else list is executed. If no else list or then list is executed, then the if command returns a zero exit status.
while list do list done
A while command repeatedly executes the while list and, if the exit status of the last command in the list is zero, executes the do list; otherwise the loop terminates. If no commands in the do list are executed, then the while command returns a zero exit status; until may be used in place of while to negate the loop termination test.
(list)

Execute list in a sub-shell. The shell creates a new environment in which to execute the list, but does not fork a sub-shell as a Unix system would. The original environment is restored on completion.
{ list; }

list is simply executed.
[[ expression ]]
Evaluates expression and returns a zero exit status when expression is true. See Conditional Expressions below, for a description of expression. Note that [[ and ]] are keywords and require blanks between them and expression.
function name { list; }
name () { list; }
Define a function which is referenced by name. The body of the function is the list of commands between { and }. Execution of functions is described below (see Execution).

The following words are only recognised as the first word of a command and when not quoted:

if then else elif fi case esac for while until do done { } [[ ]]  

Comments

A word beginning with # causes that word and all the following characters up to a new-line to be ignored.  

Aliasing

The first word of each command is replaced by the text of an alias if an alias for this word has been defined. The alias name must a valid identifier. The replacement string can contain any valid Shell script including the meta-characters listed above. The first word of each command of the replaced text will not be tested for additional aliases. If the last character of the alias value is a blank then the word following the alias will also be checked for alias substitution. Aliases can be used to redefine special built-in commands but cannot be used to redefine the keywords listed above. Aliases can be created and listed with the alias command and can be removed with the unalias command.

Aliasing is performed when scripts are read, not while they are executed. Therefore, for an alias to take effect the alias command has to be executed before the command which references the alias is read.

Aliases are frequently used as a short hand for full path names. An option to the aliasing facility allows the value of the alias to be automatically set to the full pathname of the corresponding command. These aliases are called tracked aliases. The value of a tracked alias is defined the first time the corresponding command is looked up and becomes undefined each time the PATH variable is reset. These aliases remain tracked so that the next subsequent reference will redefine the value.  

Conditional Expressions

A conditional expression is used with the [[ compound command to test attributes of files and to compare strings. Word splitting and file name generation are not performed on the words between [[ and ]]. Each expression can be constructed from one or more of the following unary or binary expressions:
-a file
True if file exists.
-b file
True if file exists and is a block special file.
-c file
True if file exists and is a character special file.
-d file
True if file exists and is a directory.
-f file
True if file exists and is a regular file.
-g file
True if file exists and has its setgid bit set.
-h file
True if file exists and is a symbolic link.
-k file
True if file exists and has its sticky bit set. Under MS-DOS and OS/2, the sticky bit is equivalent to the ARCHIVED attribute.
-n string
True if the length of string is non-zero.
-o option
True if the option named is on.
-p file
True if file exists and is a FIFO special file or a pipe.
-r file
True if file exists and is readable.
-s file
True if file exists and has a size greater than zero.
-t [ fildes ]
True if the open file whose file descriptor number is fildes (1 by default) is associated with a terminal device.
-u file
True if file exists and has its setuid bit set.
-w file
True if file exists and is writable.
-x file
True if file exists and is executable. If file exists and is a directory, then the current process has permission to search in the directory.
-z string
True if the length of string is zero.
-L file
True if file exists and is a symbolic link.
-O file
True if file exists and is owned by the effective user id of this process. Under MS-DOS and OS/2, the UID bit is equivalent to the HIDDEN attribute.
-G file
True if file exists and is owned by the effective user group of this process. Under MS-DOS and OS/2, the GID bit is equivalent to the SYSTEM attribute.
-S file
True if file exists and is a socket.
file1 -nt file2
True if file1 is newer than file2. True if file1 exists and is newer than file2.
file1 -ot file2
True if file1 exists and is older than file2.
file1 -ef file2
True if file1 and file2 and refer to the same file. Under MS-DOS and OS/2, inode information is not available, and the shell compares the absolute filenames.
s1 = s2
True if strings s1 and s2 are identical.
s1 != s2
True if strings s1 and s2 are not identical.
s1 < s2
True if string s1 comes before s2 are based on the ASCII value of their characters.
s1 > s2
True if string s1 comes after s2 are based on the ASCII value of their characters.
n1 -eq n2
True if n1 is equal to n2.
n1 -ne n2
True if n1 is not equal to n2.
n1 -lt n2
True if n1 is less than to n2.
n1 -gt n2
True if n1 is greater than to n2.
n1 -le n2
True if n1 is less than or equal to n2.
n1 -ge n2
True if n1 is greater than or equal to n2.

Not all of the above have meaning under MS-DOS or OS/2. In such cases, the appropriate value is set (false, except for -O and -G).

A compound expression can be constructed from these primitives by using any of the following, listed in decreasing order of precedence.

( expr )
True, if expr is true. Used to group expressions.
! expr
True, if expr is false.
expr1 && expr2
True, if expr1 and expr2 are both true.
expr1 || expr2
True, if expr1 or expr2 is true.
 

Tilde Substitution

Each word is checked to see if it begins with an unquoted ~. If it is, the ~ is replaced by the value of the HOME parameter. A ~ followed by a + or - is replaced by the value of the parameter PWD and OLDPWD respectively.  

Command Substitution

The standard output from a command enclosed in parenthesis preceded by a dollar sign ($()), or in a pair of grave accents (``) may be used as part or all of a word; trailing new-lines are removed. The command substitution $(cat file) can be replaced by the equivalent but faster $(<file).  

Parameter Substitution

The character $ is used to introduce substitutable parameters. There are two types of parameters, positional and keyword. If parameter is a digit, it is a positional parameter. Positional parameters may be assigned values by set. Keyword parameters (also known as variables) may be assigned values by writing:

name = value [ name = value ] ...

Pattern-matching is not performed on value. There cannot be a function and a variable with the same name.

Alternatively, named parameters can be assigned values and attributes by using the typeset special command.

${parameter}
The value, if any, of the parameter is substituted. The braces are required only when parameter is followed by a letter, digit, or underscore that is not to be interpreted as part of its name. If parameter is * or @, all the positional parameters, starting with $1, are substituted (separated by spaces). Parameter $0 is set from argument zero when the shell is invoked.
${#parameter}
If parameter is * or @, the number of positional parameters is substituted. Otherwise, the length of the value of the parameter is substituted.
${parameter:-word}
If parameter is set and is non-null, substitute its value; otherwise substitute word.
${parameter:=word}
If parameter is not set or is null set it to word; the value of the parameter is substituted. Positional parameters may not be assigned to in this way.
${parameter:?word}
If parameter is set and is non-null, substitute its value; otherwise, print word and exit from the shell. If word is omitted, the message ``parameter null or not set´´ is printed.
${parameter:+word}
If parameter is set and is non-null, substitute word; otherwise substitute nothing.
${parameter#pattern}
${parameter##pattern}
If the Shell pattern matches the beginning of the value of parameter, then the value of this substitution is the value of the parameter with the matched portion deleted; otherwise the value of this parameter is substituted. In the first form the smallest matching pattern is deleted and in the latter form the largest matching pattern is deleted.
${parameter%pattern}
${parameter%%pattern}
If the Shell pattern matches the end of the value of parameter, then the value of this substitution is the value of the parameter with the matched portion deleted; otherwise the value of this parameter is substituted. In the first form the smallest matching pattern is deleted and in the latter form the largest matching pattern is deleted.

In the above, word is not evaluated unless it is to be used as the substituted string, so that, in the following example, pwd is executed only if d is not set or is null:

echo ${d:-`pwd`}

If the colon (:) is omitted from the above expressions, the shell only checks whether parameter is set or not (It is not clear what this means).

The following parameters are automatically set by the shell:

#
The number of positional parameters in decimal.
-
Flags supplied to the shell on invocation or by the set command.
?
The decimal value returned by the last synchronously executed command.
$
The process number of this shell.
!
The process number of the last background command invoked.
_
The last argument of the previous command.
~
The shell reserves all variables beginning with a ~ for its own internal use and these variables cannot be accessed by the user.

The following parameters are used by the shell:

CDPATH
The search path for the cd command. (Note that because a colon is used by MS-DOS to indicate a drive, a semi-colon is used to separate the path names instead of a colon - this implies that the CDPATH variable must be set using single or double quotes to surround the value).
COLUMNS
This variable is contains the number of columns on the screen.
COMSPEC
When the shell has to process an MS-DOS .bat or OS/2 .cmd file, it expects the file indicated by the value of this environment variable to be an executable program capable of processing the MS-DOS .bat or OS/2 .cmd file. The program is invoked with the arguments /c file_name. COMSPEC is parsed and split on white space to allow addition parameters to be passed to command processor. Thus the default environment size could be set to 1000 by setting to command /e:1000.
EDITOR
If the value of this variable ends in emacs or vi, and the VISUAL variable is not set, then the corresponding option is turned on.
ENV
If this parameter is set, then parameter substitution is performed on the value to generate the pathname of the script that will be executed when the shell is invoked (See Invocation below). This file is typically used for alias and function definitions.
ETCPROFILE
If this parameter is set, it contains the full pathname of the /etc/profile script which is executed at interactive startup when the -0 option is given to the shell. If the parameter is not set, the file /etc/profile on the root drive (see Initialisation File is used.
EXTENDED_LINE
This parameter pointers to a file which contains information for the shell about how command lines are to be built for particular external programs and how to convert from the format entered to the shell (see Command Line Building).
FCEDIT
The default editor name for the fc command.
HISTFILE
The file where command history is saved across login sessions. The default value is $HOME/history.sh.
HISTSIZE
The number of commands normally stored for history, default 100.
HOME
The default argument (home directory) for the cd command.
IFS
Internal field separators, normally space, tab, and new-line.
LINENO
This variable contains the current line number in the script being processed.
LINES
This variable contains the number of lines on the screen.
MAIL
If this parameter is set to the name of a mail file and the MAILPATH parameter is not set, the shell informs the user of the arrival of mail in the specified file.
MAILCHECK
This parameter specifies how often (in seconds) the shell will check for the arrival of mail in the files specified by the MAILPATH or MAIL parameters. If set to 0, the shell will check before each prompt.
MAILPATH
A semi-colon (;) separated list of file names. If this parameter is set, the shell informs the user of the arrival of mail in any of the specified files. Each file name can be followed by % and a message that will be printed when the modification time changes. The default message is "you have mail".
OLDPWD
The previous working directory set by the cd command.
OPTARG
The value of the last option argument processed by the getopts special command.
OPTIND
The index of the last option argument processed by the getopts special command.
OSMODE
The operating system under which the shell is running (0 - MS-DOS; 1 - OS/2; 2 - MS Windows NT).
PATH
The search path for commands (see Execution below). The user may not change PATH if executing under rsh. (Note that because a colon is used by MS-DOS to indicate a drive, a semi-colon is used to separate the path names instead of a colon - this implies that the PATH variable must be set using single or double quotes to surround the value). The Shell automatically converts Unix format PATH assignments to MS-DOS format when appropriate. A assignment is converted if there are no semi-colons, no \s and one or more colons. If there is only one colon, it must not be the second character of the new value.
PATHEXTS
The variable PATHEXTS contains the list of valid extensions for which the shell should check when looking for an file to execute. This variable allows the user to specify a function to execute if a file with an extension in PATHEXTS is found (see Functions below).
PWD
The present working directory set by the cd command.
PS1
Primary prompt string, by default ``$ ´´.
PS2
Secondary prompt string, by default ``> ´´.
PS3
Selection prompt string used within a select loop, ``#? ´´.
PS4
The value of this parameter is expanded for parameter substitution and precedes each line of an execution trace. If omitted, the execution trace prompt is ``+ ´´.
RANDOM
Each time this parameter is referenced, a random integer is generated. The sequence of random numbers can be initialised by assigning a numeric value to RANDOM.
REPLY
This parameter is set by the select statement and by the read special command when no arguments are supplied.
SECONDS
Each time this parameter is referenced, the number of seconds since shell invocation is returned. If this parameter is assigned a value, then the value returned upon reference will be the value that was assigned plus the number of seconds since the assignment.
SHELL
When the shell is invoked, it scans the environment (see Environment below) for this name. If it is found and there is an 'r' in the file name part of its value, the shell becomes a restricted shell. The shell also uses this variable to decide which program to spawn to interpret shell scripts (see Execution below).
SHMODE
The compilation mode of shell - 16 or 32 bit.
STARTWINP
This variable, set by the user, contains the program to run to start a MS Windows application when the shell is running under MS Windows. The variable may contain parameters to that program as well. The shell assumes that the parameters are separated by white space. If this variable is not set, the shell will not start MS Windows applications when running under MS Windows.
VISUAL
If the value of this variable ends in emacs or vi, then the corresponding option is turned on.
TMP
The location of temporary files created by the shell. If this variable is not defined, the Shell uses the HOME directory for temporary files. Failing that, the root directory of the current drive is used.
WINTITLE
Under OS/2, the name of the shell's window.

The shell gives default values to PATH, PS1, PS2, SHELL, HOME and IFS.  

Alternation

The csh provides a filename expansion method known as alternation. This has been added into this version of the ksh. When performing filename substitution, you can get the shell to create a set of strings for you. For example: exampl{a,b,c,d,e} will expand to exampla examplb examplc exampld example. A common separated set of strings in curly braces will be expanded into a set of strings that are passed into the command. The strings are not sorted. The set of strings may contain parameter substitutions.  

Arithmetic Expansion

A string of the form $((exp)) is substituted with the value of the arithmetic expression exp. exp is treated as if it were within single quotes. See Arithmetic Evaluation below.  

Blank Interpretation

After parameter and command substitution, the results of substitution are scanned for internal field separator characters (those found in IFS) and split into distinct arguments where such characters are found. Explicit null arguments ("" or ´´) are retained. Implicit null arguments (those resulting from parameters that have no values) are removed.  

File Name Generation

Following substitution, each command word is scanned for the characters *, ? and [. If one of these characters appears the word is regarded as a pattern. The word is replaced with alphabetically sorted file names that match the pattern. If no file name is found that matches the pattern, the word is left unchanged. The character . at the start of a file name or immediately following a /, as well as the character / itself, must be matched explicitly. When matching patterns for file names, the shell ignores the case of the pattern and the file directory entries. Generated file names are always in lower case (for FAT file systems). Under HPFS on OS/2, case is preserved.

*
Matches any string, including the null string.
?
Matches any single character.
[ ... ]
Matches any one of the enclosed characters. A pair of characters separated by - matches any character lexically between the pair, inclusive. If the first character following the opening ``[´´ is a ``!´´ any character not enclosed is matched.

If the shell has to open or create the file /dev/tty or /dev/null (which are Unix special files), they are converted to the equivalent MS-DOS file names (/dev/con and /dev/nul respectively). Any user programs which could expect /dev/tty or /dev/null as arguments must do its own mapping to the MS-DOS equivalents.

The shell checks for valid FAT filenames (single dot, not at the beginning). Invalid dots are converted to ~. A warning message is displayed if the shell detects an invalid file name.  

Quoting

The following characters have a special meaning to the shell and cause termination of a word unless quoted:

; & ( ) | ^ < > new-line space tab

A character may be quoted (i.e., made to stand for itself) by preceding it with a \. The pair \new-line is ignored. All characters enclosed between a pair of single quote marks (´´), except a single quote, are quoted. Inside double quote marks (""), parameter and command substitution occurs and \ quotes the characters \, `, ", and $. "$*" is equivalent to "$1 $2 ...", whereas "$@" is equivalent to "$1" "$2" ....  

Arithmetic Evaluation

An ability to perform integer arithmetic is provided with the special command let. Evaluations are performed using long arithmetic. Constants are of the form base#n where base is a decimal number between two and thirty-six representing the arithmetic base and n is a number in that base. If base# is omitted then base 10 is used.

An arithmetic expression uses nearly the same syntax precedence, and associatively of expression as C. The following set of operators, listed in order of decreasing precedence, have been implemented:

- + ! ~ ++ -- unary minus/plus, logical NOT, complement, {pre, post}{in,de}crement
&Logical AND
^Logical XOR
|Logical OR
* / %multiplication, division, remainder
+ -addition, subtraction
<< >>Logical shift left and right
<= >= < >comparison
== !=equality inequality
&&Logical AND
|| ^^Logical OR, XOR
? :Ternary operator
= += -= *= /= %= &= ^= |= <<= >>= &&= ||= ^^= assignment

The operators &&, ||, &&= and ||= are short-circuiting and only one of the latter two expressions in a ternary operator is evaluated. Note the precedence of the logical AND, XOR and OR operators.

Sub-expressions in parentheses () are evaluated first and can be used to override the above precedence rules.

Named parameters can be reference by name within an expression without using the parameter substitution syntax.

Since many of the arithmetic operators require quoting, an alternative form of the let command is provided. For any command which begins with a ((, all the characters until a matching )) are treated as a quoted expression. More precisely, ((...)) is equivalent to let "...".  

Prompting

When used interactively, the shell prompts with the value of PS1 before reading a command. If at any time a new-line is typed and further input is needed to complete a command, the secondary prompt (i.e., the value of PS2) is issued.

Many people like to have the shell provide them with useful information in their prompt. To accommodate this, the shell recognises special sequences of characters in the values of PS1 and PS2, and substitutes the appropriate information for them. The special sequences and what they signify are:

%d
Place the current date, in the form DAY DD-MM-YY into the prompt.
%e
Place the current event number (as defined by the history command) into the prompt. If history evaluation has been turned off (via history -d), no number will be substituted in (i.e. the %e will be removed).
%n
Place the current working drive into the prompt.
%p
Place the current working directory into the prompt.
%t
Place the current time of day, in the form HH:MM into the prompt. The time is on a 24 hour clock, i.e. 1:30 in the afternoon will be 13:30.
%v
Place the operating system version number, in the form OS name MM:MM into the prompt.
%%
Place the character % into the prompt.
\xxx
Place the character \xxx into the prompt. The processing of escape sequences is the same as that for echo.

Some of these facilities are of more use than others.  

Input/Output

Before a command is executed, its input and output may be redirected using a special notation interpreted by the shell. The following may appear anywhere in a simple-command or may precede or follow a command and are not passed on to the invoked command; substitution occurs before word or digit is used:

<word
Use file word as standard input (file descriptor 0).
>word
Use file word as standard output (file descriptor 1). If the file does not exist it is created; otherwise, it is truncated to zero length.
>>word
Use file word as standard output. If the file exists output is appended to it (by first seeking to the end-of-file); otherwise, the file is created.
<<[-]word
The shell input is read up to a line that is the same as word, or to an end-of-file. The resulting document becomes the standard input. If any character of word is quoted, no interpretation is placed upon the characters of the document; otherwise, parameter and command substitution occurs, (un-escaped) \new-line is ignored, and \ must be used to quote the characters \, $, `, and the first character of word. If - is appended to <<, all leading tabs are stripped from word and from the document.
<&digit
Use the file associated with file descriptor digit as standard input. Similarly for the standard output using >&digit.
<&-
The standard input is closed. Similarly for the standard output using >&-.
n<>word
causes the file word to be opened on file descriptor n for both reading and writing. The file must already exist.

If any of the above is preceded by a digit, the file descriptor which will be associated with the file is that specified by the digit (instead of the default 0 or 1). For example:

... 2>&1

associates file descriptor 2 with the file currently associated with file descriptor 1.

The order in which redirections are specified is significant. The shell evaluates redirections left-to-right. For example:

... 1>xxx 2>&1

first associates file descriptor 1 with file xxx. It associates file descriptor 2 with the file associated with file descriptor 1 (i.e. xxx). If the order of redirections were reversed, file descriptor 2 would be associated with the terminal (assuming file descriptor 1 had been) and file descriptor 1 would be associated with file xxx .

The environment for the execution of a command contains the file descriptors of the invoking shell as modified by input/output specifications.

Redirection of output is not allowed in the restricted shell.  

Environment

The environment (see environ(5)) is a list of name-value pairs that is passed to an executed program in the same way as a normal argument list. The shell interacts with the environment in several ways. On invocation, the shell scans the environment and creates a parameter for each name found, giving it the corresponding value. If the user modifies the value of any of these parameters or creates new parameters, none of these affects the environment unless the export command is used to bind the shell's parameter to the environment (see also set -a). A parameter may be removed from the environment with the unset command. The environment seen by any executed command is thus composed of any unmodified name-value pairs originally inherited by the shell, minus any pairs removed by unset, plus any modifications or additions, all of which must be noted in export commands.

The environment for any simple-command may be augmented by prefixing it with one or more assignments to parameters. Thus:

TERM=450 cmd args

and

(export TERM; TERM=450; cmd args)

are equivalent (as far as the execution of cmd is concerned).

If the -k flag is set, all keyword arguments are placed in the environment, even if they occur after the command name. The following first prints a=b c and c:

echo a=b c
set -k
echo a=b c
 

Signals

The INTERRUPT and QUIT signals for an invoked command are ignored if the command is followed by &; otherwise signals have the values inherited by the shell from its parent, with the exception of signal 11 (but see also the trap command below).  

Command Re-entry

The text of the last HISTSIZE (default: 100) commands entered from a terminal device is saved in a history file. The file $HOME/history.sh is used if the HISTFILE variable is not set. The special command fc is used to list or edit a portion of this file. The portion of the file to be edited or listed can be selected by number or by giving the first character or characters of the command. A single command or range of commands can be specified. If you do not specify an editor program as an argument to fc, the value of the parameter FCEDIT is used. The edited command is printed and re-executed upon leaving the editor. The editor name - is used to skip the editing phase and to re-execute the command. In this case a substitution parameter of the form old=new can be used to modify the command before execution. For example, if r is aliased to `fc -e -', typing `r bad=good c' re-executes the most recent command that starts with the letter c and replaces the first occurrence of the string bad with the string good.  

History

When reading input from an interactive terminal and vi, emacs or gmacs input editing mode has not been selected (see In-line Editing Options), a ``!´´ at the start of a line signals to the shell that it should attempt to perform a history substitution. A history substitution is a short-hand method which allows the user to recall a previous command for execution or editing. The recalled command is placed in the command line for editing or passing to the rest of the shell for normal processing. A history substitution takes the form:

! [ ! | str | num ] terminator

!! will place the previous command in the command line. !num will place the history command with the specified number in the command line. !str will find the most recent command line that started with the characters in str.

The terminator determines what action is performed after the history line has been found. If the original history command is entered using the <return> key, the new command line is passed directly to the shell. If the <end> key is pressed, the new command line can be edited in the manner described below.  

Command Line Editing

When reading input from an interactive terminal, certain keystrokes allow the current input line to be edited. The following keystrokes corresponding to the following functions are defined in the initialisation file sh.ini. The keywords in the initialisation file which provide the functions are listed below:
Right
Move the cursor right one character
WordRight
Move the cursor right one word
Left
Move the cursor left one character
WordLeft
Move the cursor left one word
Previous
Get the previous command from the history file
Next
Get the next command from the history file
Insert
Toggle insert/overwrite mode (note the shape of the cursor changes to indicate the current mode)
DeleteRight
Delete the current character unless the cursor is at the end of line when no action is taken
Start
Move the cursor to the start of the command
Complete
Attempt to complete the filename. The shell attempts to complete the file name at the current cursor position. The file name is delimited by white space characters. If the shell is unable to complete the file name (ie no match can be found in the appropriate directory), the bell is rung. If a single match is found, the new file name is displayed. If multiple matches are found, the file name is replaced by the longest non-unique part of the file name and the bell is rung.
End
Move the cursor to the end of the command, unless the first character of the command is a !, in which case the appropriate history search is done. The cursor is placed at the end of the command line.
Flush
Delete to the end of the line
ScanBackward
Search backwards from the current history command for the next match against the last history request or the string currently in the command line if there has been no previous history request.
ScanForeward
Search forewards from the current history command for the next match against the last history request or the string currently in the command line if there has been no previous history request.
Clear
Erase the complete line.
ClearScreen
Clears the complete screen. This function is only available under OS/2.
Directory
Display the file name list matching the partially entered file name under the cursor. If no matches are found the bell is rung. To display the whole directory, enter the directory name followed by a slash /. After the directory listing has been displayed, the entered command line is redisplayed.
DeleteLeft
Delete the character to the left of the cursor.
Return
Execute the command line, unless the first character of the command is a !, in which case the appropriate history processing is done. This is the actual key pressed and cannot be modified by the initialisation file.
Jobs
Print a list of the child processes of the shell. This function is only available under OS/2.
Transpose
Transpose the two characters under the cursor.
Quote
Disable any special processing for the next keystroke.
 

In-line Editing Options

Normally, each command line entered from a terminal device is simply typed followed by a new-line (`RETURN' or `LINE FEED'), see previous section. If the vi option is active, the user can edit the command line. To be in this edit mode set the vi option. An editing option is automatically selected each time the VISUAL or EDITOR variable is assigned a value ending in either of these option names.

The editing mode implements a concept where the user is looking through a window at the current line. The window width is the value of COLUMNS if it is defined, otherwise 80. If the line is longer than the window width minus two, a mark is displayed at the end of the window to notify the user. As the cursor moves and reaches the window boundaries the window will be centred about the cursor. The mark is a > (<, *) if the line extends on the right (left, both) side(s) of the window.

The search commands in each edit mode provide access to the history file. Only strings are matched, not patterns, although a leading ^ in the string restricts the match to begin at the first character in the line.  

Vi Editing Mode

There are two typing modes. Initially, when you enter a command you are in the input mode. To edit, the user enters control mode by typing ESC (\033) and moves the cursor to the point needing correction and then inserts or deletes characters or words as needed. Most control commands accept an optional repeat count prior to the command.

In edit mode, the key mappings defined in the initialisation file are mapped onto the appropriate vi edit command.

Input Edit Commands

By default the editor is in input mode.

backspace
Deletes previous character.
Ctrl-W
Deletes the previous blank separated word.
Ctrl-D
Terminates the shell.
Ctrl-V
Escapes the next character. Editing characters can be entered in a command line or in a search string if preceded by a Ctrl-V. The Ctrl-V removes the next character's editing features (if any).
\
Escapes the next editing character.

Motion Edit Commands

These commands move the cursor:

[Count]l
Moves the cursor forward (right) one character.
[Count]w
Moves the cursor forward one alphanumeric word.
[Count]W
Moves the cursor to the beginning of the next word that follows a blank.
[Count]e
Moves the cursor to end of the current word.
[Count]E
Moves the cursor to end of the current blank-separated word.
[Count]h
Moves the cursor backward (left) one character.
[Count]b
Moves the cursor backward one word.
[Count]B
Moves the cursor to the previous blank-separated word.
[Count]|
Moves the cursor to the column specified by the count parameter.
[Count]fc
Finds the next character c in the current line.
[Count]Fc
Finds the previous character c in the current line.
[Count]tc
Equivalent to f followed by h.
[Count]Tc
Equivalent to F followed by l.
[Count];
Repeats for the number of times specified by the count parameter the last single-character find command: f, F, t, or T.
[Count],
Reverses the last single-character find command the number of times specified by the count parameter.
0
Moves the cursor to start of line.
^
Moves the cursor to first non-blank character in line.
$
Moves the cursor to end of line.

Search Edit Commands

These commands access your command history:

[Count]k
Fetches the previous command. Each time k is entered, the previous command is accessed.
[Count]-
Equivalent to k.
[Count]j
Fetches the next command. Each time j is entered, the next command is accessed.
[Count]+
Equivalent to j.
[Count]G
Fetches the command whose number is specified by the count parameter. The default is the least recent history command.
/String
Searches backward through history for a previous command containing the specified string. The string is terminated by a RETURN or new-line character. If the specified string is preceded by a ^ (caret), the matched line must begin with string. If the value of the string parameter is null, the previous string is used.
?String
Same as /String except that the search is in the forward direction.
n
Searches for the next match of the last pattern to / or ? commands.
N
Searches for the next match of the last pattern to / or ? commands, but in the opposite direction. Searches history for the string entered by the previous / command.

Text Modification Edit Commands

These commands modify the line:

a
Enters the input mode and enters text after the current character.
A
Appends text to the end of the line. Equivalent to $a.
[Count]cMotion
c[Count]Motion
Deletes the current character through the character to which the motion parameter specifies to move the cursor, and enters input mode. If the value of the motion parameter is c, the entire line is deleted and the input mode is entered.
C
Deletes the current character through the end of the line and enters input mode. Equivalent to c$.
S
Equivalent to cc.
D
Deletes the current character through the end of line. Equivalent to d$.
[Count]dMotion
d[Count]Motion
Deletes the current character up to and including the character specified by the motion parameter. If motion is d, the entire line is deleted.
i
Enters the input mode and inserts text before the current character.
I
Inserts text before the beginning of the line. Equivalent to 0i.
[Count]P
Places the previous text modification before the cursor.
[Count]p
Places the previous text modification after the cursor.
R
Enters the input mode and types over the characters on the screen.
[Count]rc
Replaces the number of characters specified by the count parameter, starting at the current cursor position, with the characters specified by the c variable. Advances the cursor after the characters are replaced.
[Count]x
Deletes the current character.
[Count]X
Deletes the preceding character.
[Count].
Repeats the previous text modification command.
[Count]~
Inverts the case of the number of characters specified by the count parameter, starting at the current cursor position, and advances the cursor.
[Count]_
Causes the word specified by the count parameter word of the previous command to be appended, and enters input mode. The last word is used if the count parameter is omitted.
*
Appends an * (asterisk) to the current word and attempts filename substitution. If no match is found, it rings the bell. Otherwise, the word is replaced by the matching pattern and input mode is entered.
\
File-name completion. Replaces the current word with the longest common prefix of all file names matching the current word with an asterisk appended. If the match is unique, a / (slash) is appended if the file is a directory and a space is appended if the file is not a directory.

Other Edit Commands

Other miscellaneous edit commands include:

[Count]yMotion
y[Count]Motion
Yanks the current character through the character to which the motion parameter specifies to move the cursor and puts these characters into the delete buffer. The text and cursor are unchanged.
Y
Yanks from the current position to the end of the line. Equivalent to y$.
u
Undoes the last text-modifying command.
U
Undoes all the text-modifying commands performed on the line.
[Count]v
Returns the command fc -e ${VISUAL:-${EDITOR:-vi}} count in the input buffer. If the count parameter is omitted, then the current line is used.
Ctrl-L
Line-feeds and prints the current line. Has effect only in control mode.
Ctrl-J
(New line) Executes the current line, regardless of the mode.
Ctrl-M
(Return) Executes the current line, regardless of the mode.
#
Sends the line after inserting a # (hash sign) in front of the line. Useful for causing the current line to be inserted in the history without being executed.
=
Lists the file names that match the current word as if an asterisk were appended to it.
@Letter
Searches the alias list for an alias named _Letter. If an alias of this name is defined, its value is placed into the input queue for processing.
 

EMACS Editing Mode

When the emacs option is set, interactive input line editing is enabled. This mode is slightly different from the emacs mode in AT&T's KornShell. In this mode various editing commands (typically bound to one or more control characters) cause immediate actions without waiting for a new-line. Several editing commands are bound to particular control characters when the shell is invoked; these bindings can be changed using the bind command.

The following editing commands are available, where a caret indicates the control character, and ^[ is the ASCII ESC character. Note that editing command names are used only with the bind command. The default bindings were chosen to resemble corresponding EMACS key bindings.


Editing commandDefaultFunction

prefix-30xE0 Introduces a 2-character command sequence. This prefix allows the user to map PC function keys onto commands. The second character is the IBM scan code value of the function key to be assigned. For example: F1 has a scan code of ;; Ctrl-F1 has a scan code of ^; Shift-F1 has a scan code of T; Alt-F1 has a scan code of h.
beginning-of-lineCtrl-AMoves the cursor to start of line.
backward-charCtrl-BMoves the cursor backward (left) one character.
eot-or-deleteCtrl-D Acts as end-of-file if alone on a line; otherwise deletes current character.
end-of-lineCtrl-EMoves the cursor to end of line.
forward-charCtrl-FMoves the cursor forward one position.
abortCtrl-G Useful as a response to a request for a search-history pattern in order to abort the search.
delete-char-backwardCtrl-H Deletes the previous character.
newline
Ctrl-M
Ctrl-J
Executes the current line.
kill-to-eolCtrl-K Deletes from the cursor to the end of the line. If preceded by a numerical parameter whose value is less than the current cursor position, this editing command deletes from the given position up to the cursor. If preceded by a numerical parameter whose value is greater than the current cursor position, this editing command deletes from the cursor up to given cursor position.
redrawCtrl-LLine-feeds and print the current line.
down-historyCtrl-N Fetches the next command line. Each time Ctrl-N is entered, the next command line forward in time is accessed.
operateCtrl-O Executes the current line and fetches the next line relative to the current line from the history file.
up-historyCtrl-P Fetches the previous command. Each time Ctrl-P is entered, the previous command back in time is accessed. Moves back one line when not on the first line of a multiple line command.
search-historyCtrl-R String Reverses search history for a previous command line containing the string specified by the String parameter. If a value of zero is given, the search is forward. The specified string is terminated by an Enter or new-line character. If the string is preceded by a ^ (caret character), the matched line must begin with String. If the String parameter is omitted, then the next command line containing the most recent String is accessed. In this case, a value of zero reverses the direction of the search.
transpose-charsCtrl-T Transposes the current character with the next character in emacs mode. Transposes the two previous characters in gmacs mode.
kill-lineCtrl-UDeletes the entire input line.
kill-regionCtrl-WKills from the cursor to the mark.
prefix-2Ctrl-X Introduces a 2-character command sequence.
pop-textCtrl-Y Restores the last item removed from line. (Yanks the item back to the line.)
search-char-forwardCtrl-] c Moves the cursor forward on the current line to the indicated character.
search-char-backward Prefix-1 Ctrl-] c Search backwards in the current line for the next keyboard character. Moves the cursor backwards on the current line to the indicated character.
quote
Ctrl-^
\
Escapes the next character. Editing characters can be entered in a command line or in a search string if preceded by a quote command. The escape removes the next character's editing features, if any.
eotCtrl-_Acts as an end-of-file.
comment-executePrefix-1 # Inserts a # (pound sign) at the beginning of the line and then execute the line. This causes a comment to be inserted in the history file.
complete-listPrefix-1 * Attempts file name substitution on the current word. An asterisk is appended if the word doesn't match any file or contain any special pattern characters.
prev-hist-word
copy-last-arg
Prefix-1 .
Prefix-1 _
Inserts on the line the last word of the previous command. If preceded by a numeric parameter, the value of this parameter determines which word to insert rather than the last word. Note I/O redirections do not count as words of the command.
beginning-of-historyPrefix-1 < Fetches the least recent (oldest) history line.
listPrefix-1 = Prints a sorted, columnated list of file names (if any) that can complete the partial word containing the cursor. Directory names have / post-pended to them, and executable file names are followed by *.
end-of-historyPrefix-1 > Fetches the most recent (youngest) history line.
backward-wordPrefix-1 B Moves the cursor backward one word.
capitalise-wordPrefix-1 C Capitalises the current word.
delete-word-backward
Prefix-1 Ctrl-H
Prefix-1 H
Deletes the previous word.
delete-word-forwardPrefix-1 D Deletes the current word.
prefix-1ESC Introduces a 2-character command sequence. Three introducers are available.
completePrefix-1 ESC File-name completion. Replaces the current word with the longest common prefix of all file names that match the current word with an asterisk appended. If the match is unique, a / (slash) is appended if the file is a directory and a space is appended if the file is not a directory.
forward-wordPrefix-1 F Moves the cursor forward one word (a string of characters consisting of only letters, digits, and underscores).
downcase-wordPrefix-1 L Changes the current word to lowercase.
multiplyPrefix-1 M Multiplies the parameter of the next command by 4.
upcase-wordPrefix-1 U Change the current word to upper-case.
Prefix-1 Digits Defines the numeric parameter. The digits are taken as a parameter to the next command. The commands that accept a parameter are forward-char, backward-char, backward-word, forward-word, delete-word-forward, delete-char-forward, delete-word-backward, delete-char-backward, prev-hist-word, copy-last-arg, up-history, down-history, search-history, upcase-word, downcase-word, capitalise-word, upcase-char, downcase-char, capitalise-char, kill-to-eol, search-char-forward and search-char-backward.
capitalise-charPrefix-1 c Capitalises the current character.
downcase-charPrefix-1 l Change the character under the cursor to lower case.
push-textPrefix-1 p Pushes the region from the cursor to the mark on the stack.
set-markPrefix-1 spaceSets a mark.
upcase-charPrefix-1 u Change the character under the cursor to upper case.
yank-popPrefix-1 y Immediately after a yank, replaces the inserted text string with the next previous killed text string.
exchange-point-and-mark Prefix-2 Ctrl-X Interchanges the cursor and the mark.
jobsPrefix-2 j Print a list of the current jobs (OS/2 only).
auto-insert Simply causes the character to appear as literal input. (Most ordinary characters are bound to this.)
delete-char-forward Deletes the character after the cursor.
no-op Does nothing.
clear-screenClear the screen and print the current line.
resetReset input, clearing the current line and yank buffers.
Prefix-1 Ctrl-] Letter Search the alias list for an alias named _Letter. If an alias of this name is defined, its value is placed into the input queue.
Prefix-1 Letter Search the alias list for an alias named _Letter. If an alias of this name is defined, its value is placed into the input queue. The Letter parameter must not specify one of the escape functions.
 

Initialisation File

When the shell is run in interactive mode, the Command Line Editing keys and other user configuration parameters are read from the initialisation file sh.ini. This shell looks for this file in the same directory as the sh executable which is running. It does not use the SHELL environment variable or search the directories in the PATH environment variable. At present, there are two types of entry in this file: keyboard configuration; and others. The entry is contained in a single line and consists of a keyword (in upper or lower case), white space, an equals symbols, white space and one or two numeric values (see strtol(3) for valid formats where base parameter is zero), followed by an end of line character.

For the keyboard entries, the numeric values give the MS-DOS Function 8 (Console Input without Echo) return values for that entry. Note that extended codes (function keys) require two calls to this function. The first call returns zero and the second the extended code. In the configuration file, a first numeric value of zero indicates a extended code and must be followed by a second value. The shell also supports the use of the ALT key in combination with another key. In this case, the first value contains 0xff, that selects ALT key, and the second key contains the appropriate scan code for the key required. The program showkey can be used to determine the scan codes required.

A non-zero first numeric value must not be followed by anything else on the line.

Other entries must only have one numeric value. A zero value disables the function and a non-zero value enables the function. At present, there are two other functions:

Bell
Enable/disable warning bells
HalfHeight
Use full or halfheight block cursor to indicate Insert mode
InsertMode
Set the default insert mode on or off
InsertCursor
Enable/disable the insert mode cursor.
RootDrive
Determines the root drive from which to read /etc/profile.
EOFKey
Determines the End-of-File key.

Invalid lines or lines beginning with a # are ignored.

The following table gives the list of valid keywords and their default values:

KeywordFirst numericSecond numericActual Key

KEYBOARD ENTRIES
ScanBackward00x49PAGE UP
ScanForeward00x51PAGE DOWN
Previous00x48UP ARROW
Next00x50DOWN ARROW
Left00x4bLEFT ARROW
Right00x4dRIGHT ARROW
WordRight00x74Control RIGHT ARROW
WordLeft00x73Control LEFT ARROW
Start00x47HOME
Clear00x76Control PAGE DOWN
Flush00x75Control END
End00x4fEND
Insert00x52INSERT
DeleteRight00x53DELETE
DeleteLeft0x08BACKSPACE
Complete00x77Control HOME
Directory00x0fShift TAB
ClearScreen00x84Control PAGE UP
Jobs00x68ALT F1
Transpose0x14Control T
Quote0x11Control Q

OTHER FUNCTIONS
Bell0
HalfHeight0
InsertMode0
InsertCursor1
RootDrive3
EOFKey0x1a
 

Execution

Each time a command is executed, the above substitutions are carried out. If the command name matches one of the Special Commands listed below, it is executed in the shell process. If the command name does not match a Special Command, but matches the name of a defined function, the function is executed in the shell process (note how this differs from the execution of shell procedures). The positional parameters $1, $2, .... are set to the arguments of the function. If the command name matches neither a Special Command nor the name of a defined function, a new process is created and an attempt is made to execute the command via exec(2).

The shell parameter PATH defines the search path for the directory containing the command. Alternative directory names are separated by a semi-colon (;). The default path is .;c:/bin;c:/usr/bin (specifying the current directory, c:/bin, and c:/usr/bin, in that order). Note that the current directory is specified by a null path name, which can appear immediately after the equal sign or between the semi-colon delimiters anywhere else in the path list. If the command name contains a / or starts with x: (where x is a drive letter) the search path is not used; such commands will not be executed by the restricted shell. Otherwise, each directory in the path is searched for an executable file. Executable files are indicated by a .exe or .com extension. This extension is automatically supplied by the shell and not have to be entered by the user.

If the file with a .com or .exe extension cannot be found in the directory, the file is opened and first 512 characters are read. If there are no characters in the block with a value in the range 0 to 7, the file is assumed to be a script file containing shell commands. Note that the shell will check the file and if that file does not exist or is not a script, it will try the file with an extension of .sh or .ksh. If a .sh or .ksh file is found, that will be processed. A sub-shell (given by the environment variable SHELL) is spawned to read it.

If the script file starts with the a line of the form #! interpreter [arguments], the interpreter is invoked instead of the shell to process the script. Optional arguments can be supplied in the script file which are passed before the name of the script file. Thus, if the file demo contained the following string as the first line

#! perl -sP

Entering demo name would be equivalent to entering the perl -sP name at the command prompt. Note that no other processing of the first line other that the separation (by white space) into arguments is done. Note that if the interpreter is either /bin/sh or /bin/ksh, the value of the SHELL environment variable is used to execute the script.

If none of the above conditions for a executable file are detected and a file with a .bat extension exists in the directory, the command processor given by the COMSPEC environment variable is spawned to process the file. This is normally the standard MS-DOS command.com or OS/2 cmd.exe processor.

A parenthesised command is also executed in a sub-shell.

Under MS-DOS or OS/2, the shell looks at the type of the program which is about to be executed. If it is an MS Windows program, the shell will automatically start MS Windows, unless it is already running. If MS Windows is already running, the shell will not start the program.  

Command Line Building

The file pointed to by the EXTENDED_LINE parameter contains information which instructs the shell on how to create the command line for a particular program from the information entered to the shell. If the program name is not found in this file, the standard MS-DOS or OS/2 mechanisms are used with no special processing.

The file is scanned prior to the execution of an external command. An entry in this file is contained in a single line and consists of a program name (in upper or lower case), white space, an equals symbol, white space and the program type followed by up to four optional values, followed by an end of line character. The value tells the shell how to build the command line and the optional values provide additional information. The valid program types are (note that invalid entries cause a line to be ignored) given below. These program types must appear as the first value following the equals. Otherwise, they are ignored. An empty program types may be empty to only select one or more of the optional values.

Under OS/2, by default the shell generates the command line using the format specified by Eberhard Mattes's EMX interface. This is makes no difference to programs which do not support the interface.

unix
This program can process the command line using the indirect command file character @. When a program, which can process this format, finds a command line parameter starting with a @ in the command line, it treats the rest of the parameter as a file and reads the command line parameters from that file (one per line, the end of line characters can be escaped by preceding with a \). Examples of this functionality include the Standard Linker and Librarian.

The file name is set up in UNIX format (using / as the directory separators).

This functionality allows the user to get round the 127 byte command line length limit of MS-DOS. A sample version of the code to process wild cards and indirect command files is included with the source of the shell in the file stdargv.c.

dos
This program can process the command line using the indirect command file character @. The file name is set up in DOS format (using \s as the directory separators).
environ
The command line is passed to the external program in the environment variable specified by the first optional value. The optional second value which is numeric, gives the parameter separator character to be used (see strtol(3) for valid formats where base parameter is zero). If this second value is missing or evaluates to zero, space is used.

The following optional values described below may be used after either unix or dos or by themselves:

switch
The optional value switch causes the program parameters to be converted from UNIX format to MS-DOS format. This means that parameters beginning with an - have it converted to a /. For all other parameters, /s are converted to \s. This option is not applied to quoted parameters or escaped characters.

This functionality allows ease of entry of MS-DOS commands which expect MS-DOS directory separators which the shell interprets as the escape character (not that the underlying MS-DOS really cares).

export
The optional value export causes the marked environment variables to be converted from UNIX format to MS-DOS format. This is equivalent to setting the -M flag for this program only.
noexpand
The optional value noexpand disables file name generation when building the command line (also see set command).
noswap
The optional value noswap disables swapping for the command. This may speed up the execution of small commands.
noquote
The optional value noquote stops the shell from escaping double quotes in the command line before they are passed to the command. Double quotes processed by some programs.
ignoretype
The optional value ignoretype stops the MS-DOS version of the shell deciding not to execute foreign (non MS-DOS) executables. The headers of some .EXE files record incorrectly the operating system and type of program. This option only applies to the MS-DOS version of the shell.
pipetty
The optional value pipetty causes the shell to set up the environment such that child shells created by this program will treat Pipes as TTYs. This feature is mainly to support EMACS under OS/2, but may prove useful to other programs in a somewhat bizarre set of circumstances. This feature is not support under the MS-DOS version of the shell.
quotewild
The optional value quotewild causes the shell to quote wild cards in the command line to the program. The default is not to quote wild cards.
 

Functions

The function keyword, described in the Commands section above, is used to define shell functions. Shell functions are read in and stored internally. Alias names are resolved when the function is read. Functions are executed like commands with the arguments passed as positional parameters. (See Execution above).

Functions execute in the same process as the caller and share all files and present working directory with the caller. Traps caught by the caller are reset to their default action inside the function. A trap condition that is not caught or ignored by the function causes the function to terminate and the condition to be passed on to the caller. A trap set on EXIT inside a function is executed after the function completes.

Ordinarily, variables are shared between the calling program and the function. However, the typeset special command used within a function defines local variables whose scope includes the current function and all functions it calls.

The special command return is used to return from function calls. Errors within functions return control to the caller.

Function identifiers can be listed with the function special command. The text of functions will also be listed. Function can be undefined with the unfunction special command.

Ordinarily, functions are unset when the shell executes a shell script. Functions that need to be defined across separate invocations of the shell should be placed in the ENV file.

The shell has an enhancement that allows it to process scripts, etc. by recognising their file extension (the character string following the last period). If the shell recognises the extension, it will invoke the function named after the extension, if it exists (for example: the command demo.c will invoke the function .c). The variable PATHEXTS contains the list of valid extensions (and must include the default extensions (.exe, .com, .bat or .cmd, .sh, .ksh and no extension). Note that functions cannot be set up for .exe or .com.

The order in which the extensions appear in PATHEXTS determines the order in which the shell will search for a file with the appropriate extension. If the shell finds a file with a matched extension and a function exists, the function is invoked with parameter 0 set to the full pathname of the file. The rest of the parameters to the function are set up as for normal functions. Beware of invoking recursive functions.  

Jobs

Under OS/2, an interactive shell associates a job with each pipeline. It keeps a table of current jobs, printed by the jobs command, and assigns them small integer numbers. When a job is started asynchronously with &, the shell prints a line that looks like:

[1] 1234

indicating job number 1 was started asynchronously and had one (top-level) process whose process ID was 1234.

There are several ways to refer to jobs in the shell. A job can be referred to by the process id of any process in the job or by one of the following:

%number
The job with the given number.
%string
Any job whose command line begins with string.
%?string
Any job whose command line contains string.
%%
Current job.
%+
Equivalent to %%.
%-
Previous job.

The shell learns when a process changes state. It informs the user when a job terminates, but only just before it prints a prompt.

If you try to leave the shell while jobs are running or stopped, you are warned, You have running jobs. You may use the jobs command to identify them. If you immediately try to exit again, the shell will not warn you a second time.  

Special Commands

Input/output redirection is permitted for these commands. File descriptor 1 is the default output location.

:
No effect; the command does nothing. A zero exit code is returned.
letter:
Select the drive specified by letter.
. file
Read and execute commands from file and return. The search path specified by PATH is used to find the directory containing file.
alias [ -t ] [ name[=value ] ... ]
Alias with no arguments prints the list of aliases in the form name=value on standard output. An alias is defined for each name whose value is given. A trailing space in value causes the next word to be checked for alias substitution. The -t flag is used to set and list tracked aliases. The value of a tracked alias is the full pathname corresponding to the given name. The value becomes undefined when the value of PATH is reset but the aliases remained tracked. Without the -t flag, for each name in the argument list for which no value is given, the name and value of the alias is printed. Alias returns zero unless a name is given for which no alias has been defined.
bind -m [ string ] = [ editing-command ]
Bind with no arguments prints the list of EMACS key bindings in the form name=value on standard output. The specified editing command is bound to the given string, which should consist of a control character (which may be written using ``caret notation'' ^x), optionally preceded by one of the two prefix characters. Future input of the string will cause the editing command to be immediately invoked. Three prefix characters (normal ESC and ^X) are supported. If the -m flag is supplied, the specified input string will afterwards be immediately replaced by the given editing-command string, which may contain editing commands.
break [ n ]
Exit from the enclosing for or while loop, if any. If n is specified, break n levels.
builtin [ args ... ]
Force the selection of the builtin version of a command. The builtin shell command selected by the first args value is executed with the parameters defined by the remaining argss. If no arguments are given, a list of all builtin commands is printed.

If the first argument is one of the following, the processing of the builtin command in the following arguments are changed as indicated:

-a
Set the following builtin commands to use builtin version in preference to any function or external versions.
-d
Set the following builtin commands to use the function or external version in preference to the builtin version.
-s
Display the current status of the following builtin commands.
continue [ n ]
Resume the next iteration of the enclosing for or while loop. If n is specified, resume at the n-th enclosing loop.
cd [ -LP ] [ arg ]
cd search replace
This command can be in either of two forms. In the first form it changes the current directory to arg. The shell parameter HOME is the default arg. The shell parameter CDPATH defines the search path for the directory containing arg. Alternative directory names are separated by a semi-colon (;). The default path is <null> (specifying the current directory). Note that the current directory is specified by a null path name, which can appear immediately after the equal sign or between the semi-colon delimiters anywhere else in the path list. If arg begins with a / or x: (where x is a drive letter), the search path is not used. Otherwise, each directory in the path is searched for arg. The cd command may not be executed by rsh.

The -L option (default) preserves logical naming when treating substituted drives (see SUBST(1)). cd -L .. moves the current directory one path component closer to the root directory. The -P option preserves the physical path when treating substituted drives. cd -P .. changes the working directory to the parent directory of the current directory. These options are only available under the MS-DOS 16 bit version.

In the second form, cd substitutes the string replace for the string search in the current directory name, PWD and tries to change to this new directory.

Note that the name chdir is an builtin alternative name for cd, allowing the user to set up aliases for cd and still have access to the change directory functionality.

detach program [ args ]
This command (which is only available under OS/2) starts and simultaneously detaches an OS/2 program from the shell. Any program that is started with detach command must be able to process independently outside the control of the shell. Builtin shell commands and functions cannot be detached.
echo [ arg ... ]
Echo arguments. Echo writes its arguments separated by blanks and terminated by a new-line on the standard output. It also understands C-like escape conventions; beware of conflicts with the shell's use of \:

\b
backspace
\c
print line without new-line
\f
form-feed
\n
new-line
\r
carriage return
\t
tab
\v
vertical tab
\\
backslash
\n
the 8-bit character whose ASCII code is the 1-, 2- or 3-digit octal number n, which must start with a zero.

Echo is useful for producing diagnostics in command files and for sending known data into a pipe.

eval [ arg ... ]
The arguments are read as input to the shell and the resulting command(s) executed.
exec [ arg ... ]
The command specified by the arguments is executed in place of this shell without creating a new process. Input/output arguments may appear and, if no other arguments are given, cause the shell input/output to be modified.
exit [ n ]
Causes a shell to exit with the exit status specified by n. If n is omitted the exit status is that of the last command executed (an end-of-file will also cause the shell to exit.)
export [ name[=value] ... ]
The given names are marked for automatic export to the environment of subsequently-executed commands. If no arguments are given, a list of all names that are exported in this shell is printed. Function names may not be exported.
false
No effect; the command does nothing. A non-zero exit code is returned.
fc [ -e EditorName ] [ -nlr ] [ First [ Last ] ]
fc -e - [ Old=New ] [ Command ]
In the first form, a range of commands from First to Last is selected from the last 100 commands that were typed at the terminal. The First and Last parameters can be specified as a number or as a string. A string locates the most recent command starting with the given string. A negative number is used as an offset to the current command number. If Last is not specified, then it is set to First. If First is not specified, the default is the previous command for editing and -16 for listing.
-l
Lists the commands to standard output.
-r
Reverses the order of the commands in the list.
-n
Suppresses command numbers when listing.
If the -l flag is not specified, the editor program specified by EditorName is invoked on a file containing these key-board commands. If EditorName is not supplied, then the value of the FCEDIT parameter is used as the editor. When editing is complete, the edited command(s) is executed.

In the second form, the specified command is carried out again after the Old=New substitution is performed.

functions [ name ... ]
The functions given by names are printed. If no arguments are given, a all the functions are displayed.
getopts optstring name [ arg ... ]
Checks arg for legal options. If arg is omitted, the positional parameters are used. An option argument begins with a + or a -. An option not beginning with + or - or the argument -- ends the options. optstring contains the letters that getopts recognises. If a letter is followed by a :, that option is expected to have an argument. The options can be separated from the argument by blanks.

getopts places the next option letter it finds inside variable name each time it is invoked, with a + prepended when arg begins with a +. The index of the next arg is stored in OPTIND. The option argument, if any, gets stored in OPTARG,

A leading : in optstring causes getopts to store the letter of an invalid option in OPTARG, and to set name to ? for an unknown option and to : when a required option is missing. Otherwise, getopts prints an error message. The exit status is non-zero when there are no more options.

history [ -deils ]
The history command, with no arguments, will print all the commands that are currently saved in the shell's history buffers. As new commands are executed, and space in the buffers runs out, old commands will be deleted. The history commands prints out the stored commands with sequence numbers. Negative numbered commands, through command number zero, are commands that were retrieved from the saved history file. Commands starting at one were entered during the current login session. If a saved command contains embedded newlines, these will be printed out as the sequence \n, so that individual command stay on one line.

The arguments changes the way the shell processes history information as follows:

-d
Disable the saving of commands in the history file.
-e
Enable the saving of commands in the history file.
-i
Initialise the history file.
-l
Load the history from the file given by the HISTFILE environment variable.
-s
Save the history to the file given by the HISTFILE environment variable.
jobs [ -lp | [ -P job ] ]
This command (which is only available under OS/2) lists the active jobs; or all active jobs if job is omitted. The -l options lists process id's in addition to the normal information. The -p flag lists all the child processes of the current shell, displaying their process ID and thread count. The -P id option lists all the child processes of the specified process or job. See Jobs for a description of the format of job.
kill [ -sig ] [ process | %jobid ] ...
This command (which is only available under OS/2) sends either the TERM (terminate) signal or the specified signal to the specified processes. Signals are given by name, which are listed by 'kill -l'. If the process number begins with a %, the signal is sent to the job referenced. See Jobs for a description of the format of a job.
let [ arg ... ]
Each arg is an arithmetic expression to be evaluated. All calculations are done as long integers and no check for overflow is performed. See Arithmetic Evaluation above for a description of arithmetic expressions..

The return code is 0 if the value of the last expression is non-zero, and 1 otherwise.

msdos [ name[=value] ... ]
The given names are marked msdos format and if the -M flag is set, the values of the these names are exported to child processes with any slashes in the value replaced by \s. If no arguments are given, a list of all msdos names is printed.
print [ -Rnprs ] [ -u unit ] [ args ... ]
The shell output mechanism. With no flags or with flag - or -- the args are printed on standard output as described by the echo command.
-R
Prints in the raw mode, in which the escape conventions of the echo command are ignored. The -R option prints all subsequent args and options other than -n.
-n
Prevents a new-line from being added to the output.
-p
-p flag has not effect and is defined for compatibility.
-r
Prints in the raw mode, in which the escape conventions of the echo command are ignored.
-s
Writes the args to the history file instead of to standard output.
-u unit
Specifies a one digit file descriptor unit number on which the output is placed. The default is 1.
pwd [ -LP ] [ drive ... ]
Print the current working directory. If drive is present, the current working directory on each of the drives is printed. drive contains a string of drive letters, no colons are required.

The -L option (default) preserves the logical meaning of the current directory and -P preserves the physical meaning of the current directory if it is on a substituted drive (see cd and SUBST(1)). This option is only available under the MS-DOS 16bit version.

read [ -prs ] [ -u unit ] [ name?prompt ] [ name ... ]
The shell input mechanism. One line is read and is broken up into words using the characters in IFS as separators. In raw mode, -r, a \ at the end of a line does not signify line continuation. The first word is assigned to the first name, the second word to the second name, etc., with leftover words assigned to the last name. If the -s flag is present, the input will be saved as a command in the history file. The -p flag has not effect and is defined for compatibility. The flag -u can be used to specify a one digit file descriptor unit to read from. The file descriptor can be opened with the exec special command. The default value of unit is 0. If name is omitted then REPLY is used as the default name. If the first argument contains a ?, the remainder of this word is used as a prompt when the shell is interactive. If the given file descriptor is open for writing and is a terminal device then the prompt is placed on this unit. Otherwise the prompt is issued on file descriptor 2. The return code is 0 unless an end-of-file is encountered.
readonly [ name[=value] ... ]
The given names are marked readonly and the values of the these names may not be changed by subsequent assignment. If no arguments are given, a list of all readonly names is printed.
return [ n ]
Causes a function to exit with the return value specified by n. If n is omitted, the return status is that of the last command executed.
set [ [-|+]aefkmntuvx ] [ -o option ] [ arg ... ]
-a
Mark variables which are modified or created for export.
-e
Exit immediately if a command exits with a non-zero exit status.
-f
Disable file name generation
-h
Each command becomes a tracked alias when first encountered.
-k
All keyword arguments are placed in the environment for a command, not just those that precede the command name.
-m
Background jobs will run in a separate process group and a line will print upon completion. The exit status of background jobs is reported in a completion message. This only applies to OS/2. The programs are detached from the current process group.
-n
Read commands but do not execute them.
-o option
The argument that follows this option can be one of the following option names:
allexport
Same as -a.
bell
Enable alarm bell on errors
break
Enable the extended SIGINT checking (see BREAK [ ON | OFF ] under COMMAND.COM). This option is only available under MS-DOS.
emacs
Select emacs-like command line editing mode.
errexit
Same as -e.
gmacs
Select gmacs-like command line editing mode.
halfheight
Set cursor to halfheight when in insert mode. If off, a full height cursor is used.
ignorecase
Under OS/2, on non-FAT (ie case retentive) file systems, the shell will match file names ignoring case. Normally, the matches are case sensitive even though the file system is only case retentive.
ignoreeof
The shell will not exit on end-of-file. The command exit must be used.
insertmode
Set the default edit mode to insert rather than overwrite.
keyword
Same as -k.
markdirs
Appends a / (slash) to all directory names that are a result of file name substitution. msdos Same as -M.
noclobber
Prevents redirection > from truncating existing files. A vertical bar must follow the redirection symbol (>|) to truncate a file when this option is turned on.
noexec
Same as -n.
noglob
Same as -f.
nounset
Same as -u.
os2
Tells the shell that the underlying operating system is OS/2.
privileged
Same as -p.
realpipes
Under OS/2, the shell will use OS/2 pipes and not temporary files to handle pipelines. See LIMITATIONS.
trackall
Same as -h.
verbose
Same as -v.
verify
Same as -V.
vi
Select vi-like command line editing mode.
winnt
Tells the shell that the underlying operating system is MS Windows NT.
xtrace
Same as -x.
-p
Not supported.
-t
Exit after reading and executing one command.
-u
Treat unset variables as an error when substituting.
-v
Print shell input lines as they are read.
-w
Disable shell warning messages.
-x
Print commands and their arguments as they are executed.
-M
For those variables marked as msdos variables, the values are exported to child processes with the slashes replaced by \s. Most MS-DOS utilities do not care if a file name contains a slash or \ as a directory separator. However, some like the linker require \s in the value of the LIB variable.
-V
Enable the File write verification option in the operation system (see VERIFY [ ON | OFF ] under COMMAND.COM or CMD.EXE).
--
Do not change any of the flags; useful in setting $1 to -.

Using + rather than - causes these flags to be turned off. These flags can also be used upon invocation of the shell. The current set of flags may be found in $-. The remaining arguments are positional parameters and are assigned, in order, to $1, $2, .... If no arguments are given the values of all names are printed.

shift [ n ]

The positional parameters from $n+1 ... are renamed $1 .... If n is not given, it is assumed to be 1.
start [ -dfWPFibCISxhH ] [ -c [ vilsna ]] [ -t title ] [ -e string ] [ -X directory ] [ args.. ]
start -O [ dos | pm ] [ -hHfWPFxibID ] [ -c [ vilsna ]] [ -t title ] [ -e string ]
start -A sessionId
This command (which is only available under OS/2) has three forms. The first form starts an OS/2 (or MS-DOS under OS/2 2.x) program in a new session. If no program and arguments parameters are entered, the shell is started unless the -C option has been used to select the OS/2 command processor. Also see DosStartSession(2).

The second form allows you to display and/or modify the default parameters used to DosStartSession(2) when the shell automatically starts a new session (ie when you attempt to run an OS/2 PM or MS-DOS program). A different set of parameters are used depending on the program type and you can modify either the OS/2 PM via -O pm, or MS-DOS via -O dos parameters. To use this form, the -O switch must be the first option on the command line.

The third form allows you to select the session sessionID.

The arguments changes the way the shell starts the session as follows:

-d
Normally, command are started by invoking the shell in the new session. This option invokes the command directly.
-S
Invoke the shell to started the command in the new session.
-f
The program becomes the foreground session. If this parameter is not specified, the program becomes a background session.
-b
The program becomes the background session.
-i
The new session will inherit the original environment of the shell instead of the current environment.
-I
The new session will independent of the current process. Normally, the session is a child session of the current process. Independent sessions are not terminated when the shell terminates. Starting a child session prevents any child session or process from also starting new sessions.
-x
The new session will a child session of the current process.
-t title
Sets the title of the new session.
-F
This application is a full-screen application that must run in a separate session independent of Presentation Manager.
-W
This is an OS/2 application that runs within a Presentation Manager window.
-P
This application is started as a Presentation Manager application.
-C
Use the OS/2 command processor instead of the shell.
-e string
This option can be used multiple times on the command line and allows the user to explicitly specify the environment to be passed to the new process. When this option is used, only those environment variables set up by the -e options are set in the new session's environment. Only one environment variable can be assigned per -e switch. The strings are in standard environment format (name=value). This may of particular use under OS/2 2.x when starting MS-DOS programs.
-c [ vilsna ]
This option allows the user to configure the size of the window created for the new session: v - visible; i - invisible; l - maximise; s - minimise; n - no autoclose; or a - autoclose. Multiple selections can be made on one option. Any selection removes any inappropriate previous selections (ie. maximise removes any previous selected minimise). Multiple -c options are not cumulative and only take the values selected by the last -c option. The default is window configuration is no autoclose.
-A sessionId
This option cannot be used with any other option and allows the user to switch to another session, given by sessionID, which must be a child session of the current session.
-X directory
This option allows the user to select the startup directory if the command is to started in a new session via the shell.
-h
The new session will inherit the current environment of the shell process (file descriptors, directory, etc).
-H
The new session will inherit the current session had when it started.
-D
Display the start up parameters for PM or MS-DOS sessions.
-O [ dos | pm ]
Select the session parameters to display or modify.
-D
Display the start up parameters for PM or MS-DOS sessions.

swap [ options ]
This command (which is only available on the 16-bit MS-DOS version) defines how the shell will handle swapping itself to reduce its memory requirements whilst other programs execute. The options are
off
Disable swapping. The shell remains in memory whilst the child is running and reduces the available memory by about 200K (depending on the size of the environment and history).
on
Enable all devices. The shell will swap out to either expanded or extended memory or to disk, execute the command and then swap back in. Whilst swapped, the shell reduces the available memory by about 3K.
expand
Enable swapping to Expanded Memory. The EMS driver must exist on your system for this to work.
extend [ start address ]
Enable swapping to Extended Memory. If you have an XMS driver on your system, the shell will use the XMS driver. Otherwise, the BIOS Interrupt 15 interface is used. The optional start address defines the based address in the Extended Memory at which point the shell writes its swap area when the BIOS interface is used. The default location is 0x100000.
disk
Enable swapping to disk. The shell creates a temporary file and saves itself in it. On completion, the file is deleted. This is the slowest method of swapping.

With no options, the current swapping options are displayed.

test expr
[ expr ]
Evaluate conditional expressions. Test evaluates the expression expr and, if its value is true, returns a zero (true) exit status; otherwise, a non-zero (false) exit status is returned; test also returns a non-zero exit status if there are no arguments. The primitives are the same as for the [[ expression ]] command, except that -a and -o are not primitives, but are used to combine operators (see test (1)). -a is the binary and operator and -o is the binary or operator.

Notice that all the operators and flags are separate arguments to test. Notice also that parentheses are meaningful to the shell and, therefore, must be escaped.

trap [ -l ] arg ] [ SignalNumber ] ...
The command arg is to be read and executed when the shell receives signal(s) SignalNumber. (Note that arg is scanned once when the trap is set and once when the trap is taken.) Trap commands are executed in order of signal number. Any attempt to set a trap on a signal that was ignored on entry to the current shell is ineffective.

If arg is absent all trap(s) SignalNumber are reset to their original values. If arg is the null string this signal is ignored by the shell and by the commands it invokes.

A potential point of confusion is that UNIX signal numbers are different from MS-DOS and OS/2 signal numbers. MS-DOS and OS/2 signal numbers sometimes appear to differ between compilers. If a numeric value is used, it is assumed to be a UNIX signal number and this is mapped to the appropriate MS-DOS/OS/2 signal number. If there is no mapping, a warning message is displayed. If the signal number is a signal name, it is translated into the appropriate MS-DOS/OS/2 signal number. The list of valid signal names is displayed using the -l flag.

If SignalNumber is DEBUG then arg will be executed after each command. If SignalNumber is ERR, arg will be executed whenever a command has a non-zero exit code.

If SignalNumber is 0 or EXIT and the trap statement is executed inside the body of a function, the command arg is executed after the function completes. If SignalNumber is 0 or EXIT for a trap set outside any function, the command arg is executed on exit from the shell.

The trap command with no arguments prints a list of commands associated with each signal number.

true
No effect; the command does nothing. A zero exit code is returned.
typeset [ -HLRZfilprtux[n] [ name[ =value ] ] ... ]
When invoked inside a function, a new instance of the parameter name is created. The parameter value and type are restored when the function completes. The following list of attributes may be specified:
-H
This flag provides UNIX to host-name file mapping on non-UNIX machines (see msdos command).
-L
Left justify and remove leading blanks from value. If n is non-zero it defines the width of the field, otherwise it is determined by the width of the value of first assignment. When the parameter is assigned to, it is filled on the right with blanks or truncated, if necessary, to fit into the field. Leading zeros are removed if the -Z flag is also set. The -R flag is turned off.
-R
Right justify and fill with leading blanks. If n is non-zero, it defines the width of the field, otherwise it is determined by the width of the value of first assignment. The field is left filled with blanks or truncated from the end if the parameter is reassigned. The -L flag is turned off.
-Z
Right justify and fill with leading zeros if the first non-blank character is a digit and the -L flag has not been set. If n is non-zero, it defines the width of the field, otherwise it is determined by the width of the value of first assignment.
-f
The names refer to function names rather than parameter names. No assignments can be made and the only other valid flags are -t, which turns on execution tracing for this function and -x, to allow the function to remain in effect across shell procedures executed in the same process environment.
-i
Parameter is an integer. This makes arithmetic faster. If n is non-zero it defines the output arithmetic base, otherwise the first assignment determines the output base.
-l
All upper-case characters converted to lower-case. The upper-case flag, -u is turned off.
-p
The output of this command, if any, is written onto the two-way pipe. This option has no effect in the Shell.
-r
The given names are marked readonly and these names cannot be changed by subsequent assignment.
-t
Tags the named parameters. Tags are user definable and have no special meaning to the shell.
-u
All lower-case characters are converted to upper-case characters. The lower-case flag, -l is turned off.
-x
The given names are marked for automatic export to the environment of subsequently-executed commands.
Using + rather than - causes these flags to be turned off. If no name arguments are given but flags are specified, a list of names (and optionally the values) of the parameters which have these flags set is printed. (Using + rather than - keeps the values to be printed.) If no names and flags are given, the names and attributes of all parameters are printed.
umask [ nnn ]
The user file-creation mask is set to nnn (see umask(2)). If nnn is omitted, the current value of the mask is printed.
unalias name ...
The aliases given by the list of names are removed from the alias list.
unfunction name ...
For each name, remove the corresponding function.
unset [ -f ] name ...
The parameters given by the list of names are unassigned (their values and attributes are erased). The following variables, as well as those with a read-only attribute cannot be unset: PATH, PS1, PS2, and IFS. If the -f flag is set, then the names refer to function names and the functions are removed.

Unsetting LINENO, MAILCHECK, OPTARG, OPTIND, RANDOM, SECONDS, and _ removes their special meaning even if they are subsequently assigned to.

ver
Display the current version of the shell.
wait [ job ]
This command (which is only available under OS/2) waits for the specified job to terminate and report its status. This status becomes the return code for the wait command. If job is not given, wait waits for all currently active child processes to terminate. The termination status returned is that of the last process. See Jobs for a description of the format of a job.
whence [ -ptv ] [ name ... ]
type [ -pt ] [ name ... ]
For each name specified, indicate how it would be interpreted if used as a command name. Note that type is a shorthand for whence -v. If the -t option is used, the shell will report the executable type of name (MS Windows, Character-based, MS-DOS, OS/2, MS Windows NT, etc).
-p
Does a path search for name even if the name is an alias, a function, or a reserved word.
-v
Produces a more verbose report.
 

Invocation

If the shell is invoked through exec(2) and the first character of argument zero is - or the -0(zero) switch is in the invocation line, commands are initially read from /etc/profile (the extensions .sh or .ksh may be used) and from $HOME/profile (the extensions .sh or .ksh may be used) if such files exist. Next, commands are read from the file named by performing parameter substitution on the value of the environment parameter ENV if the file exists. Thereafter, commands are read as described below, which is also the case when the shell is invoked as /bin/sh. The flags below are interpreted by the shell on invocation only; Note that unless the -c or -s flag is specified, the first argument is assumed to be the name of a file containing commands, and the remaining arguments are passed as positional parameters to that command file:

-c string
If the -c flag is present commands are read from string.
-s
If the -s flag is present or if no arguments remain commands are read from the standard input. Any remaining arguments specify the positional parameters. Shell output (except for Special Commands) is written to file descriptor 2.
-i
If the -i flag is present or if the shell input and output are attached to a terminal, this shell is interactive. In this case, the TERMINATE signal is ignored and the INTERRUPT signal is caught and ignored. In all cases, the QUIT signal is ignored by the shell.
-r
If the -r flag is present, the shell is a restricted shell.
-0(zero)
If the -0(zero) flag is present, this has the same effect as starting the shell with the first character of argument zero as a - (see above).
-D variable=value
This option allows the setting of environment variables at the start of the shell's execution. These variables are set up after the shell has read the current environment. The option allows the user to change the value of variable in the environment without changing the parent's environment. Under UNIX, this functionality is unnecessary. However, MS-DOS, OS/2 and MS Windows NT do not provide the necessary functionality to allow the setting of variables just for one particular program.
-P
This option enables real pipes under OS/2. See LIMITATIONS.
-R
If the -R flag is present, the shell is the root shell and cannot be terminated using exit. Under MS-DOS, the system must be re-booted. Under OS/2, the shell must be killed by an external program. In addition, the initialisation file is not read until just before the first keyboard input. This allows the location of the file to be changed by changing the value of the SHELL environment variable.
-X directory
If the -X flag is present, the following directory defines the startup directory for the shell. The shell immediately changes to this directory.

The remaining flags and arguments are described under the set command above.  

Rsh Only

Rsh is used to set up login names and execution environments whose capabilities are more controlled than those of the standard shell. The actions of rsh are identical to those of sh, except that the following are disallowed:

Changing directory (see cd(1)),
Setting the value of SHELL, ENV, or $PATH,
Specifying path or command names containing /,
Redirecting output (> and >>).

The restrictions above are enforced after profile and the ENV files are interpreted.

When a command to be executed is found to be a shell procedure, rsh invokes sh to execute it. Thus, it is possible to provide to the end-user shell procedures that have access to the full power of the standard shell, while imposing a limited menu of commands; this scheme assumes that the end-user does not have write and execute permissions in the same directory.

The net effect of these rules is that the writer of the profile has complete control over user actions, by performing guaranteed setup actions and leaving the user in an appropriate directory (probably not the login directory).

The system administrator often sets up a directory of commands (i.e., /usr/rbin) that can be safely invoked by rsh. Some systems also provide a restricted editor red.  

EXIT STATUS

Errors detected by the shell, such as syntax errors, cause the shell to return a non-zero exit status. If the shell is being used non-interactively execution of the shell file is abandoned. Otherwise, the shell returns the exit status of the last command executed (see also the exit command above).  

FILES

/etc/profile
$HOME/profile
$HOME/history.sh.
$TMP/sh*.tmp
??/sh.ini  

CRITICAL ERRORS

The Shell provide a Critical Error Handler (Interrupt 24) similar to the standard MS-DOS handler. In addition to the standard message, the handler also displays the Extended Error Code information in hexadecimal.  

LIMITATIONS

Under MS-DOS, any TSR (Terminate Stay Resident) programs must be loaded before loading Sh as the shell will overwrite the TSR when it reloads itself after swapping out.

The shell checks for valid DOS filenames (single dot, not at the beginning). Invalid dots are converted to ~. A warning message is displayed if the shell detects an invalid file name.

Under OS/2, asynchronous commands are supported to a degree. However, this is very limited because of the nature of the forking commands under OS/2 which does not match the UNIX model. This difference has also meant that pipes (as in MS-DOS) are implemented as files and not OS/2 pipes. For more details, see the source code.

However, real OS/2 pipes can be used with care for simple pipelines which do not create sub-shells or assume that a real child shell is created because the shell does not create child, it simulates their creating in the same process. This is because there is no fork under OS/2. See the set command on how to enable/disable real pipes.  

SEE ALSO

cd(1), test(1), umask(1),
exec(2), pipe(2), signal(2), umask(2), strtol(3), profile(4), environ(5) in the UNIX System Programmer Reference Manual.
COMMAND(1) and SUBST(1) in the MS-DOS Reference Guide.
CMD(1) in the OS/2 Reference Guide.
CMD(1) in the MS Windows NT Reference Guide.
DosStartSession(2) in the OS/2 Control Program Reference Manual.  

ACKNOWLEDGEMENTS

This program is based on ideas, code or parts of code developed by:

David Korn and Steve Bourne (the original ideas)
Charles Forsyth (the original source for the MINIX Shell program)
Erik Baalbergen (the code for the test function)
Paul Falstad (the code for the maths functions)
Simon J. Gerraty (the code for the new lexical analyser and the VI/EMACS edit functions).

In addition, a very large number of people (too many to mention) who have been involved in testing and debugging the program.


 

Index

NAME
SYNOPSIS
DESCRIPTION
Definitions
Commands
Comments
Aliasing
Conditional Expressions
Tilde Substitution
Command Substitution
Parameter Substitution
Alternation
Arithmetic Expansion
Blank Interpretation
File Name Generation
Quoting
Arithmetic Evaluation
Prompting
Input/Output
Environment
Signals
Command Re-entry
History
Command Line Editing
In-line Editing Options
Vi Editing Mode
EMACS Editing Mode
Initialisation File
Execution
Command Line Building
Functions
Jobs
Special Commands
Invocation
Rsh Only
EXIT STATUS
FILES
CRITICAL ERRORS
LIMITATIONS
SEE ALSO
ACKNOWLEDGEMENTS

This document was created by man2html, using the manual pages.
Time: 12:12:16 GMT, February 01, 2023